Capacitive and Infrared Gas Sensors for the Assessment of the Methane Number of LNG Fuels

Liquid Natural Gas (LNG) is an energy source that is becoming more important in energy transition, as the world is facing lower the CO2 emissions and backup sources for wind and solar energy are needed. LNG is becoming a major player not only as fuel for power plants, but also in transport and mobility. However, the composition of LNG varies significantly between the various production locations around the world, and the layering of hydrocarbons with different molecular weights takes place even in LNG containers. This is especially critical for LNG engines, in which the ignition properties of the gas depend heavily on the fuel quality or Methane Number (MN) of the gas. For optimized engine operation and motor management, this fuel quality should be measured regularly, preferably online and by a small and low-cost sensor. This paper presents two sensor solutions for the assessment of the full gas composition. For both sensors, the standard deviation in the composition of the relevant hydrocarbons was low enough to calculate the Methane Number with an accuracy of approximately 1 MN unit. It was demonstrated that the electronic capacitive sensor was better suited to assess the higher hydrocarbons, whereas the infrared sensor showed higher selectivity for the lower hydrocarbons

lOptical coupling structure made by imprinting between single-mode polymer waveguide and embedded VCSEL

Polymer-based integrated optics is attractive for inter-chip optical interconnection applications, for instance, for coupling photonic devices to fibers in high density packaging. In such a hybrid integration scheme, a key challenge is to achieve efficient optical coupling between the photonic chips and waveguides. With the single-mode polymer waveguides, the alignment tolerances become especially critical as compared to the typical accuracies of the patterning processes. We study novel techniques for such coupling requirements. In this paper, we present a waveguide-embedded micro-mirror structure, which can be aligned with high precision, even active alignment method is possible. The structure enables 90 degree bend coupling between a single-mode waveguide and a vertical-emitting/detecting chip, such as, a VCSEL or photodiode, which is embedded under the waveguide layer. Both the mirror structure and low-loss polymer waveguides are fabricated in a process based mainly on the direct-pattern UV nanoimprinting technology and on the use of UV-curable polymeric materials. Fabrication results of the coupling structure with waveguides are presented, and the critical alignment tolerances and manufacturability issues are discussed

Pilot-scale conversion of lime-treated wheat straw into bioethanol: quality assessment of bioethanol and valorization of side streams by anaerobic digestion and combustion

The limited availability of fossil fuel sources, worldwide rising energy demands and anticipated climate changes attributed to an increase of greenhouse gasses are important driving forces for finding alternative energy sources. One approach to meeting the increasing energy demands and reduction of greenhouse gas emissions is by large-scale substitution of petrochemically derived transport fuels by the use of carbon dioxide-neutral biofuels, such as ethanol derived from lignocellulosic material. Results This paper describes an integrated pilot-scale process where lime-treated wheat straw with a high dry-matter content (around 35% by weight) is converted to ethanol via simultaneous saccharification and fermentation by commercial hydrolytic enzymes and bakers' yeast (Saccharomyces cerevisiae). After 53 hours of incubation, an ethanol concentration of 21.4 g/liter was detected, corresponding to a 48% glucan-to-ethanol conversion of the theoretical maximum. The xylan fraction remained mostly in the soluble oligomeric form (52%) in the fermentation broth, probably due to the inability of this yeast to convert pentoses. A preliminary assessment of the distilled ethanol quality showed that it meets transportation ethanol fuel specifications. The distillation residue, which contained non-hydrolysable and non-fermentable (in)organic compounds, was divided into a liquid and solid fraction. The liquid fraction served as substrate for the production of biogas (methane), whereas the solid fraction functioned as fuel for thermal conversion (combustion), yielding thermal energy, which can be used for heat and power generation. Conclusion Based on the achieved experimental values, 16.7 kg of pretreated wheat straw could be converted to 1.7 kg of ethanol, 1.1 kg of methane, 4.1 kg of carbon dioxide, around 3.4 kg of compost and 6.6 kg of lignin-rich residue. The higher heating value of the lignin-rich residue was 13.4 MJ thermal energy per kilogram (dry basis)

Clinical Trial Strategies to Compare Protons With Photons

The favorable beam properties of protons can be translated into clinical benefits by target dose escalation to improve local control without enhancing unacceptable radiation toxicity or to spare normal tissues to prevent radiation-induced side effects without jeopardizing local tumor control. For the clinical validation of the added value of protons to improve local control, randomized controlled trials are required. For the clinical validation of the added value of protons to prevent side effects, both model-based validation or randomized controlled trials can be used. Model-based patient selection for proton therapy is crucial, independent of the validation approach. Combining these approaches in rapid learning health care systems is expected to yield the most efficient and scientifically sound way to continuously improve patient selection and the therapeutic window, eventually leading to more cancer survivors with better quality of life. (C) 2018 The Authors. Published by Elsevier Inc

National Protocol for Model-Based Selection for Proton Therapy in Head and Neck Cancer

In the Netherlands, the model-based approach is used to identify patients with head and neck cancer who may benefit most from proton therapy in terms of prevention of late radiation-induced side effects in comparison with photon therapy. To this purpose, a National Indication Protocol Proton therapy for Head and Neck Cancer patients (NIPP-HNC) was developed, which has been approved by the health care authorities. When patients qualify according to the guidelines of the NIPP-HNC, proton therapy is fully reimbursed. This article describes the procedures that were followed to develop this NIPP-HNC and provides all necessary information to introduce model-based selection for patients with head and neck cancer into routine clinical practice.</p

Management strategies in response to an institutional crisis:The case of earthquakes in the Netherlands

When a policy sector is confronted with a relatively strong and steep decline in legitimacy, we speak of an institutional crisis. We know little about the causes or consequences of these crises. This article explores how institutional crises are managed. It focuses on the effects of management strategies observed in a case study of an institutional crisis in the Netherlands. While we found that policy elites displayed a tendency to maintain the status quo of a policy sector, we also found that the effectiveness of their response strategies was negated by the counter-response it evoked among freshly energized interest, advocacy and citizen groups. We conclude that the resolution of an institutional crisis is inherently contested. Based on our case study, we develop a theoretical model and formulate propositions that may help to improve our understanding of institutional crisis management

Multiparameter Sensor Array for Gas Composition Monitoring

In the energy transition from fossil to renewable resources, gas is foreseen to play an important role. However, the composition of the gas is expected to change due to a wider variation of sources. In order to mitigate potential challenges for distributors and end-users, a new low-cost gas composition sensor was developed that will be able to monitor the composition and energy content of these gas sources, ranging from biogas to liquid natural gas (LNG). Together with industrial and academic partners a gas sensor was realized that can be inserted in an existing gas grid. A first demonstrator was realized that was small enough to be used in low and medium pressure gas pipes (100 mbarg—8 barg). Adding the pressure and temperature data to the chip readings enables to determine the concentrations of methane, ethane, propane, butane, nitrogen and carbon dioxide, including small fluctuations in water vapor pressure and subsequently calculate the Calorific Value, Wobbe Index and Methane Number

Are you Ready2Help? Conceptualizing the management of online and onsite volunteer convergence

Citizens have often been found to converge on disaster sites. Such personal convergence is increasingly supported by online informational convergence. The adoption of online platforms represents an opportunity for response organizations to manage these two different manifestations of citizen convergence. We analyse one such platform, “Ready2Help”, developed by the Red Cross in The Netherlands. Our research demonstrates that by utilizing platforms, response organizations are able to transcend the boundaries between different types of organized behaviour during disaster. We extend the original conceptualization of organized behaviour, as previously described by the Disaster Research Center, explaining how the development of new platforms channels convergence of citizens and information. As such, platforms provide an interface between established, expanding, extending, and emergent forms of organized behaviour. These developments change the landscape of organized behaviour in times of disaster